IP Ethernet over 2-Channel RG Coaxial Converter

Model: STHA-IP-2CH

IP to analog converter rj45 to coax converter

RJ45 to 2 channel coax converter for cascading

For CCTV IP camera systems

DC12V

Select the number of specifications

Please check the product information you want!

Product Description Data sheet Topology

STHA-IP-2CH turns any analog video cable into a high-speed network connection. This allows analog cameras to be replaced with IP cameras without installing any new cabling, resulting in system cost savings of approximately 30-40%. STHA-IP-2CH converter uses coaxial cables, GR59 RG6 and other cables to extend the transmission of network signals such as IP cameras, routers, IPTV, etc. to a distance of 2KM; and can transmit multiple IP signals simultaneously through one cable. It can solve the problem of short transmission distance of IP cameras, and the installation is simple, labor-saving and requires no optical fiber.

Application scope

Used to transform existing analog video sites, upgrade analog video surveillance to network IP video surveillance; elevator video surveillance; network IP video remote expansion.

Product Name	IP Network Ethernet to BNC Coaxial RG59 Converter
Model	STHA-IP-2CH
Chipset used	QCA6410
Flash	8Mbit
Transmission Frequency	2M-30M
Interface	BNC interface2, RJ45 interface1
Transmission Rate	maximum 100Mbps
Maximum Transmission Range	2KM
Cable Requirement	Coaxial cable RG59 RG6 cable
Self-network Quantity	2-24 sets (a cable can be connected to 24 sets)
product features	IEEE 1 based P1901 technology supports multimedia services
The measured TCP/IP throughput data is as	Transmission distance: RG59 cable can transmit up to 2000 meters, and keep the TCP/IP transmission rate not lower than 30Mbps. The measured TCP/IP throughput data is as follows: A) RG59 cable length is less than 400 meters, the throughput data is 92Mbps B) RG59 cable length is less than 1000 meters, the throughput data is 74Mbps C) RG59 cable length is less than 2000 meters, the throughput data is 30Mbps
General Indicators
Power Supply	DC12V1A (Can share a power supply with a network IP camera)
Power consumption	3W
Operating Temperature	Minus 20 degrees Celsius to 40 degrees Celsius above zero
Relative Humidity	5%-95% Non-condensing

No comment

Previous : IP to RG coaxial converter Next : Ethernet over Coax Extender with PoE

Product Description

Application scope

Used to transform existing analog video sites, upgrade analog video surveillance to network IP video surveillance; elevator video surveillance; network IP video remote expansion.

Data sheet

Product Name	IP Network Ethernet to BNC Coaxial RG59 Converter
Model	STHA-IP-2CH
Chipset used	QCA6410
Flash	8Mbit
Transmission Frequency	2M-30M
Interface	BNC interface2, RJ45 interface1
Transmission Rate	maximum 100Mbps
Maximum Transmission Range	2KM
Cable Requirement	Coaxial cable RG59 RG6 cable
Self-network Quantity	2-24 sets (a cable can be connected to 24 sets)
product features	IEEE 1 based P1901 technology supports multimedia services
The measured TCP/IP throughput data is as	Transmission distance: RG59 cable can transmit up to 2000 meters, and keep the TCP/IP transmission rate not lower than 30Mbps. The measured TCP/IP throughput data is as follows: A) RG59 cable length is less than 400 meters, the throughput data is 92Mbps B) RG59 cable length is less than 1000 meters, the throughput data is 74Mbps C) RG59 cable length is less than 2000 meters, the throughput data is 30Mbps
General Indicators
Power Supply	DC12V1A (Can share a power supply with a network IP camera)
Power consumption	3W
Operating Temperature	Minus 20 degrees Celsius to 40 degrees Celsius above zero
Relative Humidity	5%-95% Non-condensing